Characteristics of waste plastic PP/PE film washing line:

1. Suitable for all kinds of films and PP woven bags with sediment content up to 80%;

2. Adopt circulating water system to control water flow and evaporation while ensuring cleaning effect;

3. The core part of the pretreatment module adopts wear-resistant design to ensure the continuous operation of the system for a long time;

4. The pre-crushing and pre-washing system efficiently removes most of the sediment and other impurities, protects subsequent equipment, and greatly increases the service life of the fine crushing and cleaning system;

5. The fine crushing system is designed specifically, the size of the crushed film is uniform and easy to clean;

6. The high-speed centrifugal cleaning system applies corresponding blade strikes to different materials at a suitable rotation speed to achieve the cleaning effect;

7. The drum of the cleaning tank is designed for strong pressure underwater cleaning, which can remove residual impurities to a large extent; the claw-type uniform speed discharge ensures uniform discharge while controlling the water content, providing a process basis for the dehydration module;

8. The film drying technology combining centrifugal dewatering, screw squeezing and high temperature hot air strictly controls the moisture content of the finished product within 5%, which is suitable for high-quality granulation requirements;

9. After theoretical calculations and multiple actual measurements, the details of the mechanical operation of the crushing, cleaning and drying links are adjusted to avoid material loss due to excessive processing;

10. The entire line is automatically controlled, and the units of the system are associated with each other to maximize the production capacity and have a predictive function for possible abnormal situations to ensure the safety of the system;

11. Corresponding granulation system can be equipped according to production requirements.

Characteristics of waste plastic HDPE bottle washing line:

1. Suitable for cleaning all kinds of plastic products with high toughness and thickness between 1-25 mm;

2. Using circulating water to ensure the cleaning effect while controlling the water flow and evaporation;

3. The crushing system adopts wear-resistant design to ensure the continuous operation of the system for a long time;

4. The high-speed centrifugal cleaning system applies corresponding blade strikes to different materials at a suitable rotation speed to achieve the best cleaning effect;

5. The drum of the cleaning tank is designed for strong pressure underwater cleaning to remove residual impurities to the maximum extent;

6. The corresponding centrifugal dehydration and hot air drying system can be equipped according to the moisture content set according to the production requirements;

7. After theoretical calculations and multiple actual measurements, the details of the mechanical operation of the crushing, cleaning and drying links are adjusted to avoid material loss due to excessive processing;

8. The entire line is automatically controlled, and the units of the system are connected to each other to increase the production capacity and have a predictive function for possible abnormal situations to ensure the safety of the system.